User guide

Working With the Summit WM Series Spy
Summit WM20 User Guide, Software Release 4.2182
4 To delete the selected APs, click Delete marked WAPs.
NOTE
The selected APs are deleted from the Summit WM series Spy database, not from the Summit WM Controller
database. You can delete the APs from the Summit WM Controller database after you delete them from the
Altitude APs Configuration Access Approval screen of the corresponding RF Data Collector Engine. You can also
delete the selected third-party APs if they are removed from the corresponding WM-AD in the RF Collector
Engine, or if that WM-AD has been deleted from the WM-AD list.
Viewing the Scanner Status Report
When the Summit WM series Spy is enabled, you can view a report on the connection status of the RF
Data Collector Engines with the Analysis Engine.
To view the Summit WM series Spy scanner engine status display:
1 From the main menu, click Summit Spy. The Summit Spy screen is displayed.
2 Click the Scanner Status link. The Scanner Status report is displayed, as shown in the example
below.