User guide

Working With the Summit WM Series Spy
Summit WM20 User Guide, Software Release 4.2174
Enabling the Analysis and Data Collector Engines
Before using the Summit WM series Spy, you must enable and define the Analysis and data collector
engines.
To enable the Analysis engine:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 In the left pane, click Summit Spy. The Summit Spy Configuration screen is displayed.
3 To enable the Summit Spy Analysis Engine, select the Enable Summit Spy Analysis Engine
checkbox.
4 To enable the Summit Spy Data Collection Engine on this Summit WM Controller, select the Enable
Local Summit Spy Data Collection Engine checkbox.
5 To save your changes, click Apply.
NOTE
Currently, the Summit WM Controller WM20 does not support the Remote Collection Engines functionality of the
Summit WM Controller, Access Points and Software solution. The Remote Collection Engines functionality is
currently only available for the Summit WM Controller WM200/WM2000. For WM20 select both Enable Summit Spy
Analysis Engine and Enable Local Summit Spy Data Collection Engine checkbox to make use of the Summit Spy
feature.