User guide

Enabling SNMP
Summit WM20 User Guide, Software Release 4.2 163
● EXTREME-SUMMIT-WM-SMI
● EXTREME-SUMMIT-WM-DOT11-EXTNS-MIB
● EXTREME-SUMMIT-WM-BRANCH-OFFICE-MIB
The MIB is provided for compilation into an external NMS. No support has been provided for
automatic device discovery by an external NMS.
The Summit WM Controller is the only point of SNMP access for the entire system. In effect, the
Summit WM Controller proxies sets, gets, and alarms from the associated Wireless APs.
Enabling SNMP on the Summit WM Controller
You can enable SNMP on the Summit WM Controller to retrieve statistics and configuration
information.
To enable SNMP Parameters:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 In the left pane, click SNMP. The Simple Network Management Protocol screen is displayed.