User guide

Configuring Privacy for a WM-AD
Summit WM20 User Guide, Software Release 4.2 135
4 Select Static Keys (WEP).
5 From the WEP Key Length drop-down list, select the WEP encryption key length:
64-bit
128-bit
152-bit
6 Select one of the following input methods:
Input Hex – If you select Input Hex, type the WEP key input in the WEP Key box. The key is
generated automatically, based on the input.
Input String – If you select Input String, type the secret WEP key string used for encrypting and
decrypting in the WEP Key String box. The WEP Key box is automatically filled by the
corresponding Hex code.
7 To save your changes, click Save.
To configure privacy by WPA-PSK for a Captive Portal WM-AD:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is
displayed.
2 In the left pane WM Access Domains list, click the WM-AD you want to configure privacy by WPA-
PSK for a Captive Portal. The Topology tab is displayed.
3 Click the Privacy tab.
4 Select WPA-PSK.
5 To enable WPA v1 encryption, select WPA v.1.