User guide

Enabling Multicast for a WM-AD
Summit WM20 User Guide, Software Release 4.2 133
To enable multicast for a WM-AD:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is
displayed.
2 In the left pane WM Access Domains list, click the WM-AD you want to enable Multicast for. The
Top o lo gy tab is displayed.
3 Click the Multicast tab.
4 To enable the multicast function, click Enable Multicast Support.
5 Define the multicast groups by selecting one of the radio buttons:
● IP Group – Type the IP address range.
● Defined groups – Select from the drop-down list.
6 Click Add. The group is added to the list above.
7 To enable the wireless multicast replication for this group, select the corresponding Wireless
Replication checkbox.
8 To modify the priority of the multicast groups, select the group row and click the Up or Down
buttons.
A Deny All rule is automatically added as the last rule, IP = *.*.*.* and the Wireless Replication
checkbox is not selected. This rule ensures that all other traffic is dropped.
9 To save your changes, click Save.
NOTE
The multicast packet size should not exceed 1450 bytes.