Specifications

RADIUS Accounting

Summit WM20 Technical Reference Guide, Software Version 4.2 79

Termination Codes

The RADIUS client (Summit WM Controller or AP) terminates the wireless device user’s session when

one of the following events occur:

● user request

● idle timeout

● session timeout

● administrator reset

Filter-Id 11 string Filter-Id (Accept-response)

Acct-Interim-Interval 85 integer (Accept-response/GUI input)

Session-Timeout 27 integer (Accept-response/GUI input)

Class 25 octets (Accept-response)

Acct-Status-Type 40 integer Stop/Interim-Update

Acct-Terminate-Cause 49 integer Termination code (only in stop packet)

Acct-Authentic 45 integer Radius/Local/Remote

Framed-IP-Address 8 ipaddr Mu_ip_address

Connect-Info 77 string 802.11 a[b][g]

NAS-port-type 61 integer 18/19

Called-Station-ID 30 string BP MAC

Calling-Station-ID 31 string mu_mac_address

Acct-Delay-Time 41 integer

Acct-Session-Time 46 integer

Acct-Input-Packets 47 integer

Acct-Output-Packets 49 integer

Acct-Input-Octets 42 integer

Acct-Output-Octets 43 integer

BP-Serial VSA string Extreme-AP-Serial

BP-Name VSA string Extreme-AP-Name

WM-AD-Name VSA string Extreme-WM-AD-Name

SSID VSA string Extreme-SSID

Table 11: Information elements supported in RADIUS Stop or Interim messages (Continued)

Attribute NO.

RAD. Data

Type

Name