Specifications

RADIUS Attributes

Summit WM20 Technical Reference Guide, Software Version 4.278

RADIUS Accounting

Account-Start Packet

Table 10 lists the information elements (including VSAs) supported in a RADIUS Start message, issued

by Summit WM Controller, Access Points and Software, with RADIUS Accounting enabled:

Account-Stop/Interim Packet

Table 11 lists the information elements (including VSAs) supported in a RADIUS Stop or Interim

messages, issued by Summit WM Controller, Access Points and Software, with RADIUS Accounting

enabled:

Table 10: Information elements supported in RADIUS Start messages

Attribute NO.

RAD. Data

Type

Name

Acct-Session-Id 44 string mu_session_id

User-Name 1 string mu_user_id

Filter-Id 11 string Filter-Id (Accept-response)

Acct-Interim-Interval 85 integer (Accept-response/GUI input)

Session-Timeout 27 integer (Accept-response/GUI input)

Class 25 octets (Accept-response)

Acct-Status-Type 40 integer Start

Acct-Authentic 45 integer Radius/Local/Remote

Framed-IP-Address 8 ipaddr Mu_ip_address

Connect-Info 77 string 802.11 a or 802.11 a/b

NAS-port-type 61 integer 18/19

Called-Station-ID 30 string BP MAC

Calling-Station-ID 31 string mu_mac_address

NAS-IP-Address 4 ipaddr User configurable

NAS-Identifier 32 string User configurable

Acct-Delay-Time 41 integer

BP-Serial VSA string Extreme-AP-Serial

BP-Name VSA string Extreme-AP-Name

WM-AD-Name VSA string Extreme-WM-AD-Name