Specifications

Hardware Maintenance
Summit WM20 Technical Reference Guide, Software Version 4.268
Backing up the Summit WM20 Controller’s system configuration
You can back up the Summit WM20 Controller’s system configuration. You can also define the
automatic schedule backups to occur. While defining a scheduled backup, you can configure to have the
backup copied to an FTP server. The backup will be copied to the FTP server after the backup is
completed on the local drive. For more information, refer to the Summit WM20 User Guide.
WARNING!
Whenever you change the system configuration, you must always define the automatic schedule backup to be copied
to the FTP server. If this is not done, you may not able to retrieve the system configuration in the event of system
failure.