Specifications

Summit WM20 Controller Diagnostics
Summit WM20 Technical Reference Guide, Software Version 4.2 59
NOTE
Rescue procedure is not applicable in recovery of failed hardware, including HDD.
The Summit WM20 Controller supports the following methods for rescue:
● Local Rescue – rescue file is directly present on filesystem
● Remote Rescue – rescue file is located in a remote FTP server
Local Rescue
The rescue partition contains a rescue image. The rescue image is typically installed at manufacturing
time, during the image cloning process. The user can select the Local rescue method to utilize the local
stored file as the rescue image.
Remote Rescue
The remote method allows the user to directly install the rescue image as part of the download process.
By default the remote image is not stored in the local partition. The user is given the option to save
downloaded rescue image into the partition.
Summit WM20 Controller Capacity
Table 6 shows the system capacities for Summit WM20 Controller.
Summit WM20 Controller LED Indicators
Summit WM20 Controller’s LEDs
The Summit WM20 Controller has four lights on its front panel.
Table 6: Summit WM20 Controller Capacity
Summit WM20 Controller
Number of APs
32
Number of APs – Local and
Foreign (Availability)
64
Number of Users
512 Simultaneous users (Local)
Number of WM-AD
8
Number of Voicecalls
Minimum 61 (Simultaneous users/calls)
Maximum Throughput
400 Mbps over the two1000BT interfaces for mixed
traffic Internet distribution of packet sizes