Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2160
BEAST (75)
2 Client%s is in an infinite loop! Detected possible issue with
Client behaviour on redirection.
Verify that ""Non-Authenticated""
filter rules for ""WM-AD"" are
properly defined to allow access
to target authentication server.
Filter failure may result in
continuous redirection. If no
configuration issue is identified
Contact Technical Support to
investigate.
3 Cannot grok the MAC address
for%s, ignoring request
Failed to identify session being
redirected. Typically client will
be retried.
If problem persists Contact
Technical Support for
investigation.
4 Cannot get a token from secMgr
for%s (Langley communication
timeout?)
Failed to obtain credential
abstraction for captive portal
redirection. Redirection
operation will fail for that
operation. Client will most likely
restart.
If problem persists Contact
Technical Support for
investigation.
5 Cannot grok a URL for%s
(Langley communication
timeout?)
Failed to identify the URL to
which a user session should be
redirected to. Possible issue
with configuration of WM-AD
captive portal settings.
If problem persists Contact
Technical Support for
investigation.
6 Cannot grok a URL for%s
(MU_S_MGR error)
Failed to identify the URL to
which a user session should be
redirected to. Possible issue
with configuration of WM-AD
captive portal settings.
If problem persists Contact
Technical Support for
investigation.
8 Internal error Internal component error.
Typical clients will retry
operation.
If problem persists Contact
Technical Support for
investigation.
Table 37: BEAST (75) logs and events
Log
ID
Log Message Comment Action
Critical
1 Failed to receive CIA message. Internal communication
operation.
If problem persists Contact
Technical Support for
investigation.
2 Unable to connect to database. Failed to interface with
provisioning system. Will affect
report generation.
If problem persists Contact
Technical Support for
investigation.
3 Failed to initialize the input
queue.
Internal operational issue. May
result in failure to generate
proper reports. Component may
need to be reset.
If problem persists Contact
Technical Support for
investigation.
Table 36: REDIRECTOR4 (68) logs and events (Continued)
Log
ID
Log Message Comment Action