Specifications

FILTER_MGR_ID (67)
Summit WM20 Technical Reference Guide, Software Version 4.2 157
FILTER_MGR_ID (67)
78 Client session de-registration
succeeded (%s) Reason is:
Tunnel Disconnect.
Policy/Mobility request to user
de-registration.
None
79 Client session de-registration
succeeded (%s) Reason is: User
request.
User requested disconnection
from Mobility Domain (Captive
Portal).
None
80 Client session de-registration
succeeded (%s) Reason is:
Mobility Manager request.
Policy/Mobility request to user
de-registration.
None
83 Client session de-registration
succeeded (%s) Reason is: User
changing subnet.
Policy request to user de-
registration.
None
Table 35: FILTER_MGR_ID (67) logs and events
Log
ID
Log Message Comment Action
Critical
1 Connection to messaging bus
failed - reason [%d]. Filter
Manager shutdown!!!
Internal operation error.
Connection will be re-attempted.
If problem persists Contact
Technical Support for
investigation.
Major
9 Unknown filter ID [%d] to be
sent to FE.
Possible configuration issue.
Unknown configuration element
may cause operational issues.
If problem persists Contact
Technical Support for
investigation.
10 Number of rules per filter ID
[%d] exceeds the limit.
Limits enforcement. Possible
that some of the intended filter
rules for a definition have not
been persisted.
Revisit rule definition to
determine effectiveness of
existing definitions and identify
set of rules to possible delete to
create additional space
11 Total number of rules exceeds
the limit [%d].
Limits enforcement. Possible
that some of the intended filter
rules for a definition have not
been persisted.
Revisit rule definition to
determine effectiveness of
existing definitions and identify
set of rules to possible delete to
create additional space
12 No rules defined for this filter ID
[%d].
Internal Error Condition. Filers
are defined by default with at
least 1 rule (Deny All). This
condition should never occur.
If problem persists Contact
Technical Support for
investigation.
13 Filter rules response returned
NACK. Error code [%d].
Internal operation failure. Failed
to obtain a set of filter rules
from the systems provisioning
system. Component will retry.
If problem persists Contact
Technical Support for
investigation.
14 FE is not responding - error
[%d].
Failed to communicate with FE
during provisioning or stats
collection information. Filtering
system will reset.
If problem persists Contact
Technical Support for
investigation.
Table 34: MU_SESMGR_ID (66) logs and events (Continued)
Log
ID
Log Message Comment Action