Specifications

RU_SESMGR_ID (65)
Summit WM20 Technical Reference Guide, Software Version 4.2 155
36 Mobility tunnel establishment
failed with Peer%s. Please verify
peer's reachability.
Possible Feature Impact. Some
possible user impact as tunnel
change purges sessions
associated with peer. Users if
connected will need to re-
authenticate and renegotiate
topology profile.
Determine if outage was caused
by configuration change to
Mobility feature (add/Remove of
controllers from Mobility
Domain). Determine if outage
was caused by network path
interruption. If interruption was
caused by failure of Mobility
controller, please review log file
to determine appropriate root
cause and corresponding action
37 Mobility manager startup. Component state None
38 RU Session Manager startup. Component state None
Info
65 Access point registration and
authentication succeeded. (%S.)
Access Controller registration
state
None
66 Access point registration and/or
authentication failed. (%S.)
Access Controller registration
failed. AP unsuccessful in
establishing credential exchange
with controller. AP will retry.
If problem persists Contact
Technical Support for
investigation.
67 Access point session poll
disconnect AP session timed
out. (%S.)
AP disconnected from active
controller. May no longer be
available for RF coverage.
Determine if outage was caused
by configuration change (Delete/
Pending/Release). Determine if
outage was caused by network
path interruption. If interruption
was caused by functional issue
with AP or controller please
contact Technical Support to
investigate.
68 Access controller tunnel
registration failed (%s).
Possible Feature Impact. Some
possible user impact as tunnel
change purges sessions
associated with peer. Users if
connected will need to re-
authenticate and renegotiate
topology profile.
Determine if outage was caused
by configuration change to
Mobility feature (add/Remove of
controllers from Mobility
Domain). Determine if outage
was caused by network path
interruption. If interruption was
caused by failure of Mobility
controller, please review log file
to determine appropriate root
cause and corresponding action.
69 Access point software version
validation failed. (%s)
AP was determined to not be
running an adequate firmware
version for operation with
controller. May be result of
administration specification of
firmware upgrade request.
Validate version incompatibility
of AP. Verify that correct
upgrade image is available.
Upgrade will take place
automatically.
70 %s transmission failed. Interprocess communication
failure between AP and
controller.
If problem persists Contact
Technical Support for
investigation.
Trace
130 %s
Table 33: RU_SESMGR_ID (65) logs and events (Continued)
Log
ID
Log Message Comment Action