Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2154
RU_SESMGR_ID (65)
Major
9 No Response from one RADIUS
accounting server:%s.
Possible issue with configuration
of CDR/Accounting sub-system.
Can result in lack of accounting
reporting/CDR for system users.
Doesn't affect users state,
however, it doesn't allow owner
to provide proper billing for
services rendered. If backup/
alternate servers were defined
system will attempt to connect
to them.
Validate configuration of CDR/
Accounting settings for Radius
Server and WM-AD definitions.
If problem persists contact
Technical Support to investigate.
Trace
129 %s
Table 33: RU_SESMGR_ID (65) logs and events
Log
ID
Log Message Comment Action
Major
9 Loss of active mobility tunnel
with Peer%s detected. Please
verify reachability. System will
reattempt connection.
Possible Feature Impact. Some
possible user impact as tunnel
change purges sessions
associated with peer. Users if
connected will need to re-
authenticate and renegotiate
topology profile.
Determine if outage was caused
by configuration change to
Mobility feature (add/Remove of
controllers from Mobility
Domain). Determine if outage
was caused by network path
interruption. If interruption was
caused by failure of Mobility
controller, please review log file
to determine appropriate root
cause and corresponding action.
Minor
33 Successfully established mobility
tunnel with peer%s.
Inter-AC Mobility State None
34 Mobility tunnel with Peer%s
reset due to membership
credentials change.
Inter-AC Mobility State.
Administrator changed Mobility
Domain membership list.
None
35 Mobility tunnels with Peers reset
due to membership credentials
change on current controller.
Inter-AC Mobility State.
Administrator changed Mobility
Domain membership list.
None
Table 32: RADIUS_ACCOUNTING (64) logs and events
Log
ID
Log Message Comment Action