Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2146
RF_DATA_COLLECTOR (36)
Table 29: RF_DATA_COLLECTOR (36) logs and events
Log
ID
Log Message Comment Action
Critical
1 An error has occurred in the RF
Data Collector which will cause
this component to shutdown
(and be restarted by the
system). Details:%s.
Internal operation error. Rogue
AP scan updates may be
temporarily suspended. Should
resume once component is
automatically restarted by the
system's health monitor.
If problem persists Contact
Technical Support for
investigation.
Major
9 An error has occurred in the RF
Data Collector. This error will be
ignored and the component will
attempt to continue. Details:%s.
Internal operation error. Relay of
Rogue AP scan updates may be
temporarily suspended.
If problem persists Contact
Technical Support for
investigation.
Minor
33 An error has occurred in the RF
Data Collector which will not
interfere with system processing.
This error will be ignored and
processing continued.
Details:%s.
Internal operation error. Relay of
Rogue AP scan updates may be
temporarily suspended.
If problem persists Contact
Technical Support for
investigation.
Info
65 Received scan request with
req_id of zero
Possible operational error for
Summit WM series Spy feature.
If problem persists Contact
Technical Support for
investigation.
Poll timeout with INS session Possible operational error for
Summit WM series Spy feature.
"Determine if outage was caused
by configuration change to
Summit WM series Spy feature
(add/Remove of controllers from
Scan Domain). Determine if
outage was caused by network
path interruption. If interruption
was caused by failure of INS
controller, please review the log
of that controller to determine
appropriate action.
Connection with INS is up Link with INS state (Summit
WM series Spy)
None
Connection with INS is down Possible operational error for
Summit WM series Spy feature.
"Determine if outage was caused
by configuration change to
Summit WM series Spy feature
(add/Remove of controllers from
Scan Domain). Determine if
outage was caused by network
path interruption. If interruption
was caused by failure of INS
controller, please review the log
of that controller to determine
appropriate action.
Trace
129 %s.