Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2144
Fail to receive cdr_config_notify. Possible issue with configuration
of CDR/Accounting sub-system.
Can result in lack of accounting
reporting/CDR for system users.
Doesn't affect users state,
however, it doesn't allow owner
to provide proper billing for
services rendered.
Validate configuration of CDR/
Accounting settings for Radius
Server and WM-AD definitions.
If problem persists contact
Technical Support to investigate.
Fail to receive stats bundle
notify.
Internal operation error.One
update snampshot is missed.
Possible impact to CDR/
Accounting state. Subsequent
updates should remedy the
situation.
If problem persists Contact
Technical Support for
investigation.
Fail to receive authenticated
userid from security manager.
Internal operation error. Specific
CDR record may not be
consistent. Tracking CDR is
harder without username
property.
If problem persists Contact
Technical Support for
investigation.
Client MAC:%s User-ID:%s: has
invalid IP address [0.0.0.0].
Failed to create CDR.
User records are not tracked
until user obtains proper IP
address. Verify that users are
able to obtain proper addresses
from WM-AD.
If problem persists Contact
Technical Support for
investigation.
Fail to receive message
get_params_resp:%d
Internal operation error. Specific
CDR record may not be
consistent.
If problem persists Contact
Technical Support for
investigation.
Fail to receive message
mu_deregister_notify:%d
Internal operation issue. Specific
CDR may not be consistent.
User termination time may not
be properly adjusted.
If problem persists Contact
Technical Support for
investigation.
Fail to receive message
smt_shutdown_component_req:
%d
System shutdown operation
under admin control (enable/
disable feature, system
shutdown).
If problem persists Contact
Technical Support for
investigation.
Fail to receive message
es_log_lvl_update_notify:%d
Internal communications issue.
Unable to determine proper
logging level for component.
If problem persists Contact
Technical Support for
investigation.
Info
65 New CDR file has been created. Accounting state If problem persists Contact
Technical Support for
investigation.
66 Created a new CDR record with
session id%d.
Accounting state If problem persists Contact
Technical Support for
investigation.
67 CDR record was written to file
with session id%d.
Accounting state If problem persists Contact
Technical Support for
investigation.
68 CDR Manager started normally. Accounting sub-system state If problem persists Contact
Technical Support for
investigation.
Table 28: CDR_COLLECTOR (23) logs and events (Continued)
Log
ID
Log Message Comment Action