Specifications

STACK_ADAPTER (10)
Summit WM20 Technical Reference Guide, Software Version 4.2 137
STACK_ADAPTER (10)
CLI (11)
Table 23: STACK_ADAPTER (10) logs and events
Log
ID
Log Message Comment Action
Info
65 Fast Ethernet Stack Adaptor
Started.
System initialization state None
66 Gigabit Ethernet Stack Adapter
Started.
System initialization state None
Trace
129 Received SIGHUP.
130 Received SIGINT.
131 CPDP Process Error %d.
132 Port %d Added.
133 Port %d Removed.
134 Port %d Enabled.
135 Port %d Disabled.
Table 24: CLI (11) logs and events
Log
ID Log Message Comment Action
Major
9 Upgrade process failed - failure
reason:%s.
System application/firmware
upgrade process failed. System
operating components and
personality may be lost as a
result.
If problem persists Contact
Technical Support for
investigation.
10 System restore process failed -
failure reason:%s.
Database restore procedure
failed. System configuration may
not be up to level customer
intends.
If problem persists Contact
Technical Support for
investigation.
11 Patch installation failed - failure
reason:%s.
System update failed. System
software base may not be fully
installed and may result in
subsequent failures of
operations.
If problem persists Contact
Technical Support for
investigation.
12 Process%s killed by restart CLI
command.
n/a n/a
Minor
33 FTP for%s failed.
Back-up process failed
FTP operation failed. Revisit
operation parameters.
If problem persists Contact
Technical Support for
investigation.