Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2132
13 Mobility Manager has received
incomplete filterId information
for the client with MAC%s. This
client will be treated as
experiencing an authorization
error.
MAC based authentication. User
will be disconnected and forced
to re-authenticate with system
If problem persists contact
Technical Support to investigate.
Mobility Manager has received
invalid authentication
information for the client with
MAC%s. This client will be
treated as experiencing an
authorization error.
MAC based authentication. User
will be disconnected and forced
to re-authenticate with system
If problem persists contact
Technical Support to investigate.
14 Received unknown message
type%d from Langley (CM
socket).
Internal processing issue.
Unrecognized command. Should
have no impact on system or
inter-controller mobility
operation.
If problem persists contact
Technical Support to investigate.
15 Heart-beat interval has expired -
have missed too many heart-
beats from Mobility Manager.
Mobility Agent will reset all
remote client information and
revert to nodal operation.
Agent-Controller link has
expired. Controller reverts to
nodal state. Users roaming in/
out of controller will need to re-
establish new sessions, require
re-authentication and topology
update.
Validate state of peer
controllers. Analyze logs on
controllers to determine
appropriate action.
16 Update interval has expired for
Mobility Agent with IP
address%s. Mobility Manager
will remove all information for
Mobility Agent including client
session information.
Agent-Controller link has
expired. Controller reverts to
nodal state. Users roaming in/
out of controller will need to re-
establish new sessions, require
re-authentication and topology
update.
Validate state of peer
controllers. Analyze logs on
controllers to determine
appropriate action.
17 Mobility Control connection
attempted by unrecognized
peer%s. Peer will not be allowed
to connect.
Mobility membership in
protected mode.
Administrator must approve new
system to grant access to
Mobility Domain.
18 Connection identifiers for
Mobility establishment
exhausted. Please remove stale
identifiers from permissions list.
Maximum number of peers in
Mobility Domain (127) reached.
New controllers will not be
allowed to join Mobility Domain.
Administrator should clean up
stale registered Mobility Domain
elements.
19 Agent has been informed that all
connection identifiers for
Mobility establishment
exhausted. Please remove stale
identifiers from permissions list
on manager.
Maximum number of peers in
Mobility Domain (127) reached.
New controllers will not be
allowed to join Mobility Domain.
Administrator should clean up
stale registered Mobility Domain
elements.
20 Establishment of control tunnel
with Mobility Manager failed.
Please verify Mobility
configuration for both Agent and
target Manager.
Possible problem with
configuration of Mobility feature
component subset. Inter-
Controller Mobility functionality
may not be functional.
Verify Mobility Feature
configuration. If problem
persists Contact Technical
Support for investigation.
Minor
33 Client%s. Mobility Peer Identification None
34 Client%s. Mobility Peer Identification None
Table 22: VNMGR (9) logs and events (Continued)
Log
ID
Log Message Comment Action