Specifications

RADIUS_CLIENT (7)
Summit WM20 Technical Reference Guide, Software Version 4.2 127
RADIUS_CLIENT (7)
Table 20: RADIUS_CLIENT (7) logs and events
Log
ID
Log Message Comment Action
Critical
1 A file system error occurred.
Unable to open RADIUS
dictionary file. RADIUS client
exiting.
Possible initialization problem
for RadiusClient component.
May affect ability of users to
authenticate with system and
therefore affect their ability to
gain network access.
If problem persists contact
Technical Support to investigate.
2 Cannot allocate memory for
either Captive Portal and/or EAP
modules. RADIUS client exiting.
Possible resource utilization with
system. May affect ability of
users to authenticate with
system and therefore affect their
ability to gain network access.
Component may need to be
restarted to resolve issue, or may
indicate larger problem with
system's resource utilization.
If problem persists contact
Technical Support to investigate.
3 Failed to send process status
success to Startup Manager.
Start-up Manager will reboot the
RADIUS client.
Component may be restarted by
system health monitoring
facility. May cause temporary
outage to authentication sub-
system. Issue should self resolve
after reset.
If problem persists contact
Technical Support to investigate.
4 No radius server available for
subnet:%s.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer. Verify
Reacheability of RadiusServer
utilizing the RadiusTest feature
in GlobalSettings. If problem
persists contact Technical
Support to investigate.
Major
9 Failed to retrieve configuration
from the Config Manager. Will
retry connection to Config
Manager.
Possible problem with
configuration of authentication
sub-system, in particular may
become unable to determine
correct Radius Configuration.
Connection retry should resolve
condition.
If problem persists contact
Technical Support to investigate.
10 Radius server changed:%s Configuration of RadiusServer
changed by administration.
None
11 Failed to get radius profile for
subnet:%s.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition. Verify
Reacheability of RadiusServer
utilizing the RadiusTest feature
in GlobalSettings. If problem
persists contact Technical
Support to investigate.