Specifications

RU_MANAGER (6)
Summit WM20 Technical Reference Guide, Software Version 4.2 125
12 Remote Access Point failed
registration: Maximum license
limit of APs reached.%s
MDL Mismatch. More AP
attempted to failover from
availability peer. Recommend
systems support same capacity.
Some AP may become unable to
provide RF service.
Verify number of Aps allowed by
MDL portion of License. Verify
that purchase limits match on
both systems. Contact Sales
support to discuss allowance
increases.
13 Lost connectivity with
Availability Peer%s.
Controller entering into Failover
Mode. Indicates that link with
peer controller has been lost.
Peer controller may have
shutdown or may indicate
problem with interconnecting
network. If Peer controller has
indeed failed and network
connections are intact APs will
now begin failing to surviving
controller.
Investigate state of peer
controller. Review log entries on
it to determine appropriate
action.
Minor
33 Internal error occurred for a
single request. RU Manager will
ignore the error and continue.
Failure to process AP
registration request. AP will
likely retry.
If problem persists contact
Technical Support to investigate.
34 Challenge-response key cache is
full. Until some of the existing
access point's are authenticated,
new registration requests will be
ignored.
Temporary congestion of AP
registration requests. Problem
should resolve itself.
If problem persists contact
Technical Support to investigate.
35 Internal error occurred for a
single request. RU Manager will
ignore the error and continue.
Failure to process AP
registration request. AP will
likely retry.
If problem persists contact
Technical Support to investigate.
37 SLP registration failed. RU
Manager will retry registration in
10 seconds.
Failure to register AP SLP
discovery identifiers. Aps may
not be able to find controller.
Problem should fix itself and
Aps will continue to retry.
If problem persists contact
Technical Support to investigate.
38 AC Manager: Unauthorized
client%s attempting to connect.
Unregistered Peer attempting to
establish an availability pair.
Possible misconfiguration in
Availability pairings.
Verify Availability pairing
configuration in both controllers.
If indeed configuration is
correct, contact Technical
Support to investigate.
39 AC manager: Unable to set
foreign ports in database.
Possible failure to update
availability pair configuration.
May affect Aps ability to failover
properly and expediently.
If problem persists contact
Technical Support to investigate.
40 AC manager: Unable to set
foreign APs in database.
Possible failure to register Failed
over Aps. May affect MDL
licensing and AP registration.
If problem persists contact
Technical Support to investigate.
41 AC Manager: Unable to update
foreign APs in database.
"Availability" If problem persists contact
Technical Support to investigate.
42 Access point%s attempting to
connect but maximum licensed
connections reached.
Licensed MDL reached.
Additional Aps may not become
Active therefore affecting
intended coverage area.
Validate License Key
parameters. Contact Sales
Support to discuss options on
capacity increase.
Table 19: RU_MANAGER (6) logs and events (Continued)
Log
ID
Log Message Comment Action