Specifications

Logs and Events
Summit WM20 Technical Reference Guide, Software Version 4.2124
RU_MANAGER (6)
252 Received unknown status for
sessionId %d so assume failure
253 Setup EAP entry returns failure
for sessionId %d
254 Received status failed for
sessionId %d regarding getting/
setting MU params
255 Failed to delete EAP session for
sessionId %d
Table 19: RU_MANAGER (6) logs and events
Log
ID
Log Message Comment Action
Critical
1 RU Manager has suffered a
critical internal error and will
halt (unable to start process
thread).
Internal operation problem. May
affect ability of Aps to register
with controller. Component
should be restarted.
If problem persists, contact
Technical Support to investigate.
2 RU Manager has suffered a
critical internal error and will
halt (unable to open data
dictionary).
Internal operation problem. May
affect ability of Aps to register
with controller. Component
should be restarted.
If problem persists, contact
Technical Support to investigate.
3 AC Manager: Moving into
failover mode
Controller entering into Failover
Mode. Indicates that link with
peer controller has been lost.
Peer controller may have
shutdown or may indicate
problem with interconnecting
network. If Peer controller has
indeed failed and network
connections are intact APs will
now begin failing to surviving
controller.
Investigate state of peer
controller. Review log entries on
it to determine appropriate
action.
Major
9 An AP has attempted to connect
that is unknown to the system.
AP authentication failure.%s.
AP With incorrect credentials
attempted to register. AP shall
engage in re-discovery and re-
establish proper credentials.
If problem persists contact
Technical Support to investigate.
10 AP fails discovery.%s AP has failed the discovery
registration process.
If problem persists contact
Technical Support to investigate.
11 Access Point failed registration:
Maximum license limit of APs
reached.%s
More Aps than allowed by MVL
attempted to register with
controller. Some AP may
become unable to provide RF
service
Verify number of Aps allowed by
MDL portion of License. Contact
Sales Support to discuss
capacity allowance increase
criteria.
Table 18: SECURITY_MANAGER (4) logs and events (Continued)
Log
ID
Log Message Comment Action