Specifications

STATS_SERVER (3)
Summit WM20 Technical Reference Guide, Software Version 4.2 111
STATS_SERVER (3)
Cannot send syslog enable
notify.
Possible impact to Log System
configuration in terms of logging
to external log system. Retry
applying syslog configuration.
If problem persists, contact
Technical Support to investigate.
Software config response sent
out. Serial number:%s
Configuration of AP None
Upgrading Sensor (%s) image to
ftp:%s to path:%s
AP role change None
Initial channel report has been
successfully sent to AP. Serial
number:%s
AP Channel report Feature None
Subsequent channel report has
been successfully sent to AP.
Serial number:%s
AP Channel report Feature None
Trace
129 entering handler for CIA
message %d
130 %s
Table 17: STATS_SERVER (3) logs and events
Log
ID Log Message Comment Action
Critical
1 Statistics Server suffered an
internal connection failure.
Retrying connection in 5
seconds.
Internal Component Problem.
Stats Server unable to establish
proper inter-process
communications. May affect
system status reports, user
accounting and CDRs.
If problem persists, contact
Technical Support to investigate.
Minor
33 Unable to create thread to
register callbacks to Startup
Manager. Stats Server will
continue, but will be unable to
respond to Startup Manager
requests.
Internal Component Problem.
Major component functions not
affected.
If problem persists, contact
Technical Support to investigate.
35 Unable to start timer thread
necessary to collect router port
SNMP statistics
Affects ability to report statistic
utilization of system interfaces.
No deterrent effect to system
operation other than to interface
reports.
If problem persists, contact
Technical Support to investigate.
36 Received empty AP bundle
statistics record: There may be
no active APs connected to the
system.
n/a None
Table 16: CONFIG_MANAGER (2) logs and events (Continued)
Log
ID
Log Message Comment Action