Specifications

CONFIG_MANAGER (2)
Summit WM20 Technical Reference Guide, Software Version 4.2 109
CONFIG_MANAGER (2)
81 Unable to clear AP critical
alarm. Alarm ID [%d].
Possible problem with logging
system.
If problem persists, contact
Technical Support to investigate.
82 Unable to send log export
response.
Possible problem with logging
system.
If problem persists, contact
Technical Support to investigate.
83 Invalid page request [%d]. Possible problem with logging
system.
If problem persists, contact
Technical Support to investigate.
Table 16: CONFIG_MANAGER (2) logs and events
Log
ID Log Message Comment Action
Critical
1 Config Manager has suffered a
critical error and will halt. Error
Details:%s
OAM configuration system
restarts due to internal error.
Active Configuration request may
not have been processed.
System will restart configuration
manager.
If problem persists, contact
Technical Support to investigate.
2 Access point controlled software
upgrade has failed. This
normally occurs if a corrupt
image file was selected as the
upgrade image. Please select
another image for the
upgrade:%s
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
If problem persists, contact
Technical Support to investigate.
3 Access point automatic software
upgrade/downgrade has failed.
This normally occurs if a corrupt
image file was selected as the
default image. Please select
another default image. This
alarm will repeat as long as the
system is in automatic mode:%s
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
If problem persists, contact
Technical Support to investigate.
4 An AP has encountered an error
processing configuration. Error
details:%s
Access Point failed to process
configuration set. AP is not able
to provide service. Verify AP
Image version to validate that
controller and AP are properly
matched.
If problem persists, contact
Technical Support to investigate.
Major
9 Config Manager has experienced
an error which has prevented it
from properly processing a
request. CM will continue
running, however this error may
be an indicator of a larger
system problem. Error
Details:%s
Configuration/Administration
request may not have been
properly processed.
If problem persists, contact
Technical Support to investigate.
Table 15: EVENT_SERVER (1) logs and events (Continued)
Log
ID
Log Message Comment Action