Specifications

6-2 Extreme Networks Consolidated Hardware Guide
Alpine 3800 Series Switch Overview
• Redundant, load-sharing, hot-swappable power supplies (Alpine 3808 and Alpine
3804)
• Field-replaceable, hot-swappable fan tray (Alpine 3808 and Alpine 3804)
• Fully nonblocking operation
— All ports transmit and receive packets at wire speed
• Autonegotiation for half-duplex or full-duplex operation on 10/100 Mbps ports
• Load-sharing on multiple ports
• VLANs, including support for IEEE 802.1Q
• STP (IEEE 802.1D) with multiple STP domains
• Policy-Based QoS
• Wire-speed IP routing
• IP multinetting
• DHCP/BOOTP relay
• RIP version 1 and RIP version 2
• OSPF routing protocol
• IPX routing, including RIP and SAP
• Wire-speed IP multicast routing support
• Internet Group Multicast Protocol (IGMP) and IGMP snooping
• DVMRP
• IGMP snooping to control IP multicast traffic
• Console (RS-232) CLI connection
• Telnet CLI connection
• ExtremeWare VistaWeb-based management interface
• SNMP support
• Dedicated 10BASE-T/100BASE-TX port for out-of-band management via CLI,
ExtremeWare Vista, or SNMP