Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

Chapter 13: SNMP trap configuration using
ACLI
Use Simple Network Management Protocol (SNMP) traps and notifications to gather information
about device activities, alarms, and other information on management stations.
For more information about how to configure SNMP community strings and related topics, see
Configuring Security on Avaya Virtual Services Platform 7200 Series and 8000 Series,
NN47227-601.
Configuring an SNMP host
Configure an SNMP host so that the system can forward SNMP traps to a host for monitoring. You
can use SNMPv1, SNMPv2c, or SNMPv3. You configure the target table parameters (security name
and model) as part of the host configuration.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Configure an SNMPv1 host:
snmp-server host WORD<1-256> [port <1-65535>] v1 WORD<1-32> [filter
WORD<1-32>]
3. Configure an SNMPv2c host:
snmp-server host WORD<1-256> [port <1-65535>] v2c WORD<1-32> [inform
[timeout <1-2147483647>] [retries <0-255>] [mms <0-2147483647>]]
[filter WORD<1-32>]
4. Configure an SNMPv3 host:
snmp-server host WORD<1-256> [port <1-65535>] v3 {noAuthNoPriv|
authNoPriv|AuthPriv} WORD<1-32> [inform [timeout <1-2147483647>]
[retries <0-255>]] [filter WORD<1-32>]
5. Ensure that the configuration is correct:
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 75
Comments on this document? [e-mail]