Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

Name Description
HostAddress Shows the network address for this entry. The format
of the value depends on the protocol portion of the
local index.
Source Shows the interface or port on which the network
address was most recently seen.
PhysicalAddress Shows the physical address on which the network
address was most recently seen.
LastChange Shows the value of the sysUpTime when the entry
was created or last changed. If this value changes
frequently, it can indicate duplicate address
problems.
Viewing the data source for host statistics
View the Host Control tab to see the data source for both network layer and application layer host
statistics.
Procedure
1. In the navigation pane, expand the following folders: Configuration > Serviceability >
RMON.
2. Click Network Layer Host.
3. Click the Host Control tab.
Host Control field descriptions
Use the data in the following table to use the Host Control tab.
Name
Description
Index Shows a unique identifier for the entry in the table.
DataSource Shows the source of data for the associated host
table. The statistics in this group reflect all packets
on the local network segment that attaches to the
identified interface.
NHDropFrames Shows the total number of frames that the probe
receives and drops but does not include in the
StatsDropEvents value. This event can occur if the
probe is out of resources and sheds the load from
this collection. This value does not include packets
Table continues…
RMON configuration using EDM
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 46
Comments on this document? [e-mail]