Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

Address Map Control field descriptions
Use the data in the following table to use the Address Map Control tab.
Name Description
Index Shows a unique identifier for the entry in the table.
DataSource Shows the source of data for the entry.
DroppedFrames Shows the total number of frames that the probe
receives and drops but does not include in the
StatsDropEvents value. This event can occur if the
probe is out of resources and sheds the load from
this collection. This value does not include packets
that were not counted because they had MAC-layer
errors.
Owner Shows the entity that configured this entry.
Viewing address mappings
View the mappings of network layer address to physical address to interface.
About this task
The probe adds entries on this tab based on the source MAC and network addresses in packets
without MAC-level errors.
The probe populates this table for all protocols on the Protocol Directories tab with a value of
AddressMapConfig equal to supportedOn.
Procedure
1. In the navigation pane, expand the following folders: Configuration > Serviceability >
RMON.
2. Click Address Map.
3. Click the Address Map tab.
Address Map field descriptions
Use the data in the following table to use the Address Map tab.
Name
Description
LocalIndex Shows a unique identifier for the entry in the table.
Table continues…
Viewing address mappings
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 45
Comments on this document? [e-mail]