Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

Job aid
The following table describes the fields in the output for the show rmon network-host-stats
command.
Parameter Description
HOSTADDR Shows the host address for this entry.
INPKT Shows the number of packets without errors transmitted to this address.
This value is the number of link-layer packets so a single, fragmented
network-layer packet can increment the counter several times.
OUTPKT Shows the number of packets without errors transmitted by this address.
This value is the number of link-layer packets so a single, fragmented
network-layer packet can increment the counter several times.
INOCT Shows the number of octets transmitted to this address, excluding octets in
packets that contained errors. This value counts octets in the entire packet
that contained the protocol, not just the particular protocol frames.
OUTOCT Shows the number of octets transmitted by this address, excluding octets in
packets that contained errors. This value counts octets in the entire packet
that contained the protocol, not just the particular protocol frames.
CREATETIME Shows when the entry was last activated.
Displaying RMON protocol distribution statistics
View protocol distribution statistics to see traffic statistics that each protocol generates by local area
network (LAN) segment.
Procedure
View RMON protocol distribution statistics:
show rmon protocol-dist-stats
Example
Switch: show rmon protocol-dist-stats
================================================================================
Rmon Protocol Dist Stats
================================================================================
PROTOCOL PKTS OCTETS
--------------------------------------------------------------------------------
IP 0 0
TCP 0 0
UDP 0 0
FTP 0 0
SSH 0 0
TELNET 0 0
HTTP 0 0
RLOGIN 0 0
TFTP 0 0
SNMP 0 0
HTTPS 0 0
Displaying RMON information
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 39
Comments on this document? [e-mail]