Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

Parameter Description
MATRIXCFG Describes and configures the probe support for the network layer and
application layer host tables for this protocol. The values can be one of the
following:
• NOT SUPPORTED
• SUPPORTED OFF
• SUPPORTED ON
NHDROPFRAMES Shows the total number of network host frames that the probe receives and
drops. This value does not include packets that were not counted because
they had MAC-layer errors.
OWNER Shows the entity that configured this entry.
PROTOCOL Shows the protocols RMON2 can monitor:
• Internet Protocol (IP)
• Transmission Control Protocol (TCP)
• User Datagram Protocol (UDP)
• File Transfer Protocol (FTP)
• Secure Shell version 2 (SSHv2)
• Telnet
• Hypertext Transfer Protocol (HTTP)
• Remote login (RLOGIN)
• Trivial File Transfer Protocol (TFTP)
• Simple Networking Management Protocol (SNMP)
• Hypertext Transfer Protocol Secure (HTTPS)
Displaying RMON network host statistics
View network host statistics to see Layer 3 traffic statistics for each host. The network layer host
MIB monitors traffic packets in and out of hosts based on the network layer address.
Procedure
View RMON network host statistics:
show rmon network-host-stats
Example
Switch: show rmon network-host-stats
================================================================================
Rmon Network Host Stats
================================================================================
HOSTADDR INPKT OUTPKT INOCT OUTOCT CREATETIME
--------------------------------------------------------------------------------
RMON configuration using ACLI
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 38
Comments on this document? [e-mail]