Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

show rmon {address-map|application-host-stats WORD<1–64>|ctl-table|
network-host-stats|protocol-dist-stats}
The following sections provide examples for each parameter.
Displaying RMON status
View the current RMON status on the switch..
Procedure
View RMON status:
show rmon
Example
Switch: show rmon
RMON Info :
Status : enable
Displaying RMON address maps
View the maps of network layer address to physical address to interface.
The probe adds entries based on the source MAC and network addresses in packets without MAC-
level errors.
Procedure
View RMON address maps:
show rmon address-map
Example
Switch: show rmon address-map
================================================================================
Rmon Address Map Table
================================================================================
PROTOIDX HOSTADDR SOURCE PHYADDR LASTCHANGE
--------------------------------------------------------------------------------
1 12.1.1.1 2060 b0:ad:aa:42:a5:03 10/09/15 17:30:41
Job aid
The following table describes the fields in the output for the show rmon address-map command.
Parameter Description
PROTOIDX Shows a unique identifier for the entry in the table.
Table continues…
RMON configuration using ACLI
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 34
Comments on this document? [e-mail]