Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5

kmalloc-256 352 351 256 16 1 22 22
kmalloc-128 896 895 128 32 1 28 28
kmalloc-64 5120 5120 64 64 1 80 80
kmalloc-32 896 883 32 128 1 7 7
kmalloc-16 1536 1535 16 256 1 6 6
kmalloc-8 2560 2558 8 512 1 5 5
kmalloc-192 273 273 192 21 1 13 13
kmalloc-96 966 900 96 42 1 23 23
Variable definitions
Use the data in the following table to use the show khi performance command.
Table 1: Variable definitions
Variable Value
{slot[-slot][,...]} Specifies the slot number. Valid slot is 1.
Displaying KHI control processor information
Use the following commands to display key health information about the packets generated by the
type of packets and protocols received on a port.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. Display statistics for control packets that go to the control processor:
show khi cpp port-statistics [{slot/port[/sub-port][-slot/port[/sub-
port]][,...]}]
Example
Switch:1>show khi cpp port-statistics 3/1-3/7
================================================================================
KHI CPP Details - Port Statistics
================================================================================
Ports Packet Type Rx Packets Tx Packets
--------------------------------------------------------------------------------
-
3/1 LLC_TDP(134) 498 498
3/1 LLC_ISIS(137) 420 421
3/2 LLC_TDP(134) 498 498
3/4 Ether2_ARP_Request(10) 0 1
3/4 Ether2_IPv4_PIM_MC(24) 0 101
3/4 Ether2_IPv4_OSPF_MC(32) 318 320
3/4 Ether2_IPv4_OSPF_UC(34) 5 0
3/4 LLC_TDP(134) 496 496
3/5 Ether2_ARP_Request(10) 4 4
3/5 Ether2_ARP_Other(11) 0 4
3/5 Ether2_IPv4_PIM_MC(24) 0 103
3/5 Ether2_IPv4_OSPF_MC(32) 0 235
3/5 LLC_TDP(134) 374 374
Displaying KHI control processor information
December 2015 Managing Faults on Avaya VSP 7200 Series and 8000 Series 25
Comments on this document? [e-mail]