Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5.1.2

enable
configure terminal
2. Create a new notify filter table:
snmp-server notify-filter WORD<1-32> WORD<1-32>
3. Ensure that the configuration is correct:
show snmp-server notify-filter
Example
Switch(config)# snmp-server notify-filter profile3 99.3.6.1.6.3.1.1.4.1
Switch(config)#show snmp-server notify-filter
================================================================================
Notify Filter Configuration
================================================================================
Profile Name Subtree Mask
--------------------------------------------------------------------------------
profile1 +99.3.6.1.6.3.1.1.4.1 0x7f
profile2 +99.3.6.1.6.3.1.1.4.1 0x7f
profile3 +99.3.6.1.6.3.1.1.4.1 0x7f
Variable definitions
Use the data in the following table to use the snmp-server notify-filter command.
Table 15: Variable definitions
Variable Value
WORD<1-32> WORD<1-32> Creates a notify filter table.
The first instance of WORD<1-32> specifies the name of the filter
profile with a string length of 1–32.
The second instance of WORD<1-32> identifies the filter subtree
OID with a string length of 1–32.
If the subtree OID parameter uses a plus sign (+) prefix (or no
prefix), this indicates include. If the subtree OID uses the minus
sign ( – ) prefix, it indicates exclude.
You do not calculate the mask because it is automatically
calculated. You can use the wildcard character, the asterisk (*), to
specify the mask within the OID. You do not need to specify the
OID in the dotted decimal format; you can alternatively specify that
the MIB parameter names and the OIDs are automatically
calculated.
Configuring an SNMP notify filter table
January 2017 Managing Faults on Avaya VSP 7200 Series and 8000 Series 61
Comments on this document? [e-mail]