Managing Faults on Virtual Services Platform 7200 Series and 8000 Series Version 5.1.2

Variable Value
tcp-port <1025–49151> Set tcp-port for secure forwarding of syslog for host. The default
tcp-port is 1025.
To set the TCP port to default value, use command default
syslog host <1–10> secure-forwarding tcp-port.
Important:
The tcp-port 6000 cannot be used, as it is used as an internal
port for Internal Spanning Tree (IST).
Installing root certificate for syslog client
Use the following procedure to install a root certificate for a syslog client.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Install a root certificate on the store:
syslog root-cert install-filename <file-name>
The certificate is installed in folder: /intflash/.cert/.syslogrootinstalledcert/.
Note:
The offline root certificate for TLS syslog must be kept in folder: /
intflash/.cert/..syslogofflinerootcert/.
3. Uninstall a root certificate from the store:
no syslog root-cert install-filename <file-name>
4. To display the installed syslog server root certificate file:
show syslog root-cert-file
Variable definition
Use the data in the following table to use the syslog root-cert command.
Variable
Value
install-filename WORD<1–
128>
Specifies the name of the root certificate to be installed on the store.
Installing root certificate for syslog client
January 2017 Managing Faults on Avaya VSP 7200 Series and 8000 Series 45
Comments on this document? [e-mail]