Managing Faults on Avaya Virtual Services Platform 7200 Series and 8000 Series Version 4.2.1

Name Description
AddressMapConfig Describes and configures the probe support for the
network layer and application layer host tables for
this protocol. The values can be one of the following:
• notSupported
• supportedOff
• supportedOn
If the value is supportedOn, the probe adds entries
to the Address Map tab that maps the network layer
address to the MAC layer address.
HostConfig Describes and configures the probe support for the
network layer and application layer host tables for
this protocol. The values can be one of the following:
• notSupported
• supportedOff
• supportedOn
If the value is supportedOn, the probe adds entries
to the Host Control tab to collect statistics for
network layer and application layer hosts.
MatrixConfig Describes and configures the probe support for the
network layer and application layer host tables for
this protocol. The values can be one of the following:
• notSupported
• supportedOff
• supportedOn
Owner Shows the entity that configured this entry.
Viewing the data source for protocol distribution statistics
View the Distribution Control tab to see the network segment data source on which the protocol
distribution statistics are measured. The management IP mentioned as a data source represents the
IP that the SNMP agent uses to access the switch.
Procedure
1. In the navigation pane, expand the following folders: Configuration > Serviceability >
RMON.
2. Click Protocol Distribution.
3. Click the Distribution Control tab.
RMON configuration using EDM
62 Managing Faults on Avaya VSP 7200 Series and 8000 Series June 2015
Comments on this document? [e-mail]