Managing Faults on Avaya Virtual Services Platform 7200 Series and 8000 Series Version 4.2.1
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this release
- Chapter 3: Fault management fundamentals
- Chapter 4: Key Health Indicators using ACLI
- Chapter 5: Key Health Indicators using EDM
- Chapter 6: Link state change control using ACLI
- Chapter 7: Link state change control using EDM
- Chapter 8: RMON configuration using ACLI
- Chapter 9: RMON configuration using EDM
- Enabling RMON globally
- Enabling RMON on a port or VLAN
- Enabling RMON1 history
- Disabling RMON1 history
- Viewing RMON1 history statistics
- Creating an RMON1 alarm
- Creating an RMON1 port history alarm
- Viewing RMON1 alarms
- Deleting an RMON1 alarm
- Creating a default RMON1 event
- Creating a nondefault RMON1 event
- Viewing RMON1 events
- Viewing the RMON log
- Deleting an event
- Viewing the protocol directory
- Viewing the data source for protocol distribution statistics
- Viewing protocol distribution statistics
- Viewing the host interfaces enabled for monitoring
- Viewing address mappings
- Viewing the data source for host statistics
- Viewing network host statistics
- Viewing application host statistics
- Chapter 10: Viewing statistics using ACLI
- Chapter 11: Viewing statistics using EDM
- Chapter 12: Log and trap fundamentals
- Chapter 13: Log configuration using ACLI
- Chapter 14: Log configuration using EDM
- Chapter 15: SNMP trap configuration using ACLI
- Chapter 16: SNMP trap configuration using EDM
- Chapter 17: RMON alarm variables
- Glossary
Category Subcategory Variable Definition
counted by this object if and only
if it is for a protocol processed by
the local bridging function,
including bridge management
frames.
dot1dTpLearnedEntryDiscards.0 The total number of Forwarding
Database entries learned but
discarded due to a lack of space
to store them in the Forwarding
Database. If this counter
increases, it indicates that the
forwarding database is regularly
becoming full (a condition that
has negative performance effects
on the subnetwork). If this counter
has a significant value but does
not increase, it indicates that the
problem occurred but is not
persistent.
Utilization rcSysBufferUtil.0 Buffer utilization as a percentage
of the total amount of buffer
space in the system. A high value
indicates congestion.
rcSysNVRamUsed.0 DRAM in use in kilobytes.
rcSysLastChange.0 Last management-initiated
configuration change since
sysUpTime.
rcSysLastVlanChange.0 Last management-initiated VLAN
configuration change since
sysUpTime.
MLT rcStatMltIfExtnIfInMulticastPkts The total number of multicast
packets delivered to this MLT
interface.
rcStatMltIfExtnIfInBroadcastPkts The total number of broadcast
packets delivered to this MLT
Interface.
rcStatMltIfExtnIfOutMulticastPkts The total number of MLT interface
multicast packets delivered to this
MLT interface.
rcStatMltIfExtnIfOutBroadcastPkts The total number of MLT interface
broadcast packets delivered to
this MLT interface.
rcStatMltIfExtnIfHCInOctets The total number of octets
received on this MLT interface
Table continues…
RMON alarm variables
126 Managing Faults on Avaya VSP 7200 Series and 8000 Series June 2015
Comments on this document? infodev@avaya.com










