Managing Faults on Avaya Virtual Services Platform 7200 Series and 8000 Series Version 4.2.1

Category Subcategory Variable Definition
is returned by the MAC service to
the LLC (or other MAC user).
Received frames for which
multiple error conditions occur
are, according to the conventions
of IEEE 802.3 Layer
Management, counted exclusively
according to the error status
presented to the LLC.
dot3StatsSingleCollisionFrames A count of successfully
transmitted frames on a particular
interface where transmission is
inhibited by exactly one collision.
A frame that is counted by an
instance of this object is also
counted by the corresponding
instance of either the
ifOutUcastPkts object, the
ifOutMulticastPkts object, or the
ifOutBroadcastPkts object, and is
not counted by the corresponding
instance of the
dot3StatsMultipleCollisionFrames
object.
dot3StatsMultipleCollisionFrames A count of successfully
transmitted frames on a particular
interface where transmission is
inhibited by more than one
collision. A frame that is counted
by an instance of this object is
also counted by the
corresponding instance of either
the ifOutUcastPkts,
ifOutMulticastPkts, or
ifOutBroadcastPkts object, and is
not counted by the corresponding
instance of the
dot3StatsSingleCollisionFrames
object.
dot3StatsSQETestErrors A count of times that the SQE
TEST ERROR message is
generated by the PLS sublayer
for a particular interface. The
SQE TEST ERROR message is
defined in section 7.2.2.2.4 of
ANSI/IEEE 802.3-1985 and its
Table continues…
RMON alarm variables
112 Managing Faults on Avaya VSP 7200 Series and 8000 Series June 2015
Comments on this document? [e-mail]