Managing Faults on Avaya Virtual Services Platform 7200 Series and 8000 Series Version 4.2.1

About this task
Configure the profile table to associate a notification filter profile with a particular set of target
parameters.
Procedure
1. In the navigation tree, expand the following folders: Configuration > Edit > SnmpV3.
2. Click Notify Table.
3. Click the Notify Filter Profile Table tab.
4. Click Insert.
5. In the TargetParamsName box, type a name for the target parameters.
6. In the NotifyFilterProfileName box, type a name for the notify filter profile.
7. Click Insert.
Notify Filter Profile Table field descriptions
Use the data in the following table to use the Notify Filter Profile Table tab.
Name
Description
TargetParamsName Specifies the unique identifier associated with this entry.
NotifyFilterProfileName Specifies the name of the filter profile to use to generate notifications.
Enabling authentication traps
About this task
Enable the SNMP agent process to generate authentication-failure traps.
Procedure
1. In the navigation tree, expand the following folders: Configuration > Edit > Diagnostics.
2. Click General.
3. Click the Error tab.
4. Select AuthenticationTraps.
5. Click Apply.
Error field descriptions
Use the data in the following table to use the Error tab.
SNMP trap configuration using EDM
108 Managing Faults on Avaya VSP 7200 Series and 8000 Series June 2015
Comments on this document? [e-mail]