Installation Instructions

The following tables provide a list of active and passive BOCs, and includes the part numbers and
minimum software version supported.
Table 44: QSFP+ to four SFP+ 10–gigabit BOC (passive)
Cable type Cable
length
Minimum software version Part number
VSP 4000 VSP 7200 VSP 8200 VSP 8400
Passive copper
breakout cable
QSFP+ to
SFP+ DAC
BOC 1 meter
4.2.1 4.2.1 4.2.0 4.2.0 AA1404033–E6
Passive copper
breakout cable
QSFP+ to
SFP+ DAC
BOC 3 meter
4.2.1 4.2.1 4.2.0 4.2.0 AA1404035–E6
Passive copper
breakout cable
QSFP+ to
SFP+ DAC
BOC 5 meter
4.2.1 4.2.1 4.2.0 4.2.0 AA1404036–E6
Table 45: QSFP+ to four SFP+ 10–gigabit BOC (active)
Cable type Cable
length
Minimum software version Part number
VSP 4000 VSP 7200 VSP 8200 VSP 8400
Active optical
breakout cable
10 meter 4.2.1 4.2.1 4.2.1 4.2.1 AA1404041–E6
QSFP+ to QSFP+ 40–gigabit direct attach cable specifications
The QSFP+ to QSFP+ 40–gigabit Direct Attach Cable (DAC) assembly directly connects two QSFP
+ ports. For more information, see the IEEE 802.3ba 40GBASE-CR4 cable assembly specification
standard.
The following table identifies the part numbers for specific cable assembly lengths.
Cable
type
Cable
length
Minimum software version Part number
VSP 4000 VSP 7200 VSP 8200 VSP 8400
Passive
flexi-
DAC
(TAA)
QSFP+ to
QSFP+
DAC 0.5
meter
N/A 4.2.1 4.0.0 4.2.0 AA1404037–E6
Passive
copper
DAC
QSFP+ to
QSFP+
DAC 1
meter
N/A 4.2.1 4.0.0 4.2.0 AA1404029–E6
Table continues…
QSFP+ cable assembly specifications
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 79
Comments on this document? [e-mail]