Installation Instructions

Table 43: 40GBASE-ER4 operating ranges
Required operating range
2 m to 30 km
2 m to 40 km
Interoperation
40GBASE-ER4 and 40GBASE-LR4 QSFP+ transceivers can interoperate with a properly-
engineered link. It requires the cabling (channel) characteristics for 40GBASE-LR4 to be met, with
the exception of the maximum and minimum channel insertion loss values, as shown in the following
table, for the two link directions separately.
Direction Min. loss Max. loss Unit
40GBASE-LR4
transmitter to 40GBASE-
ER4 receiver
7.5 14.2 dB
40GBASE-ER4
transmitter to 40GBASE-
LR4 receiver
2.2 11 dB
QSFP+ cable assembly specifications
This section provides cable assembly specifications for the supported 40–gigabit QSFP+ transceiver
module.
Important:
The VSP switches operate in forgiving mode for QSFP+ direct attach cables, which means that
the switch will bring up the port operationally when using non-Avaya direct attach cables. Avaya
does not provide support for operational issues related to these DACs, but they will operate and
the port link will come up.
QSFP+ breakout cable specifications
This section provides a list of the supported breakout cables (BOC).
QSFP+ to four SFP+ 10–gigabit BOC
The QSFP+ to four SFP+ 10–gigabit direct attach breakout cable assembly directly connects one
QSFP+ port to four SFP+ ports.
Note:
The Avaya VSP 4000 does not support 40 Gbps QSFP+ transceivers because the VSP 4000
devices do not have any QSFP+ ports. However, the VSP 4000 series supports the four SFP+
10-gigabit ends of the breakout cable (BOC) assembly.
QSFP+
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 78
Comments on this document? [e-mail]