Installation Instructions

* This transceiver has reached end of sale (EOS). For more information about EOS transceivers and
recommended replacements for your product, or to determine existing availability for EOS
transceivers, see Locating end of sale notices on page 10.
Table 19: 1000BASE-EX DDI SFP transceiver specifications
Parameter Specification
Maximum electrical power consumption 1.2 W
Connectors Duplex LC
Cabling SMF, 9 μm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 30 dB
Maximum dispersion power penalty 2.0 dB at 120 km
Minimum attenuation between transmit and receive
ports
14 dB
Transmitter characteristics
Launch power 0 to 5.0 dBm
Receiver characteristics
Receiver sensitivity –30 dBm
Maximum receiver power –9.0 dBm
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbps Ethernet Carrier Sense Multiple Access with Collision
Detection (CSMA-CD) connectivity using multimode optical fiber. The part number for this model is
AA1419074-E6.
This transceiver is supported in Avaya VSP 4850 SFP ports (47 and 48) and Avaya VSP 4450 SFP
ports (13 through 48). The 100BASE-FX SFP is not supported in 10 Gigabit SFP+ ports.
This transceiver is supported in Avaya VSP 8400 8424GS 24–port Gigabit Ethernet SFP ESM.
The following table describes the 100BASE-FX SFP specifications.
Table 20: 100BASE-FX SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.5 W
Connectors Duplex LC
Cabling • 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance • Up to 2 km using 500 MHz-km MMF optic cable
Table continues…
SFP
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 42
Comments on this document? [e-mail]