Installation Instructions

1000BASE-SX DDI SFP specifications
The 1000BASE-SX DDI SFP transceiver has a reach of up to 550 m using 50 µm MMF, and of 275
m using 62.5 µm MMF. This SFP transceiver operates at 850 nm. The part number is AA1419048-
E6.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
DDI SFP transceivers.
Table 9: 1000BASE-SX SFP DDI (550 m) specifications
Parameter Specifications
Maximum electrical power consumption 1 watt (W)
Connector Duplex LC
Cabling MMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 7.5 dB
Transmitter characteristics
Launch power –9.5 to –4.0 dBm
Receiver characteristics
Receiver sensitivity –17 dBm
Maximum receiver power 0 dBm
1000BASE-LX DDI SFP specifications
This SFP transceiver provides 1000BASE-LX gigabit Ethernet connectivity at 1310 nanometers (nm)
using single mode or multimode optical fiber. The part number is AA1419049-E6.
Table 10: 1000BASE-LX DDI SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.0 watt (W)
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 9.5 dB
Table continues…
SFP specifications
December 2016 Installing Transceivers and Optical Components on Avaya VSP Operating System
Software 35
Comments on this document? [e-mail]