Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this release
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the Avaya Virtual Services Platform 7200 Series
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Package contents
- Installing a power supply
- Removing a power supply
- Installing a fan module
- LED state definitions
- Installing the switch in an equipment rack
- Cable requirements for the VSP 7200
- Installation and removal of transceivers
- Console port pin assignments
- 40GBASE-QSFP+ ports
- Chapter 6: Translations of safety messages
Chapter 1: Introduction
Purpose
This guide provides information and instructions to install an Avaya Virtual Services Platform 7200
Series (VSP 7200 Series) switch.
Related resources
Documentation
See the Documentation Reference for Avaya Virtual Services Platform 7200 Series and 8000
Series, NN47227-100 for a list of the documentation for this product.
Training
Ongoing product training is available. For more information or to register, you can access the Web
site at http://avaya-learning.com/.
Viewing Avaya Mentor videos
Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya
products.
About this task
Videos are available on the Avaya Support website, listed under the video document type, and on
the Avaya-run channel on YouTube.
Procedure
• To find videos on the Avaya Support website, go to
http://support.avaya.com and perform one
of the following actions:
- In Search, type Avaya Mentor Videos to see a list of the available videos.
October 2015 Installing the Avaya VSP 7200 Series 5
Comments on this document? infodev@avaya.com