Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this document
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the Avaya Virtual Services Platform 7200 Series
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Package contents
- Installing a power supply
- Removing a power supply
- Installing a fan module
- LED state definitions
- Installing the switch in an equipment rack
- Cable requirements for the VSP 7200
- Installation and removal of transceivers
- Console port pin assignments
- 40GBASE-QSFP+ ports
- Software limitations
- Chapter 6: Translations of safety messages
Connector Pin Number Signal
6 Receive data (RXD) — mandatory
7 Data set ready (DSR) — optional
8 Clear to send (CTS) — optional, can swap or link with pin 1
40GBASE-QSFP+ ports
Software limitations
The physical switch hardware creates the following software feature limitation:
• For the VSP 7200 Series, MACsec is supported only on the 10 Gbps ports of the VSP
7254XTQ model. MACsec is not supported on the VSP 7254XSQ model.
40GBASE-QSFP+ ports
November 2016 Installing the Avaya VSP 7200 Series 79
Comments on this document? infodev@avaya.com