Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this document
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the Avaya Virtual Services Platform 7200 Series
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Package contents
- Installing a power supply
- Removing a power supply
- Installing a fan module
- LED state definitions
- Installing the switch in an equipment rack
- Cable requirements for the VSP 7200
- Installation and removal of transceivers
- Console port pin assignments
- 40GBASE-QSFP+ ports
- Software limitations
- Chapter 6: Translations of safety messages
Chapter 1: Introduction
Purpose
This guide provides information and instructions to install an Avaya Virtual Services Platform 7200
Series (VSP 7200 Series) switch.
Related resources
Documentation
For installation and initial setup information of the Open Networking Adapter (ONA), refer to the
Quick Install Guide that came with your ONA.
Note:
The ONA works only with the Avaya Virtual Services Platform 4000 Series. For more
information about configuring features, refer to the VOSS documentation. See Documentation
Reference for VSP Operating System Software, NN47227-100
for a list of all the VSP 4000
documents.
Training
Ongoing product training is available. For more information or to register, you can access the Web
site at http://avaya-learning.com/.
Viewing Avaya Mentor videos
Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya
products.
November 2016 Installing the Avaya VSP 7200 Series 7
Comments on this document? infodev@avaya.com