Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this document
- Chapter 3: Hardware models
- Chapter 4: Preinstallation checklist
- Chapter 5: Installing the Avaya Virtual Services Platform 7200 Series
- Installation checklist
- Installation fundamentals
- Electrostatic discharge
- Technical specifications
- Package contents
- Installing a power supply
- Removing a power supply
- Installing a fan module
- LED state definitions
- Installing the switch in an equipment rack
- Cable requirements for the VSP 7200
- Installation and removal of transceivers
- Console port pin assignments
- 40GBASE-QSFP+ ports
- Software limitations
- Chapter 6: Translations of safety messages
c. Slide the white release latch in the direction of the arrow stamped on the lock and pull
the chassis rail out of the rack rail.
4. Lift the blue locking mechanism on the rack rail to slide the outer section back into the main
section.
Installing the switch in an equipment rack
November 2016 Installing the Avaya VSP 7200 Series 55
Comments on this document? infodev@avaya.com