Admin Guide

7. Type the location information in the sysLocation field.
8. Click Apply.
System field descriptions
Use the data in the following table to use the System tab.
Name Description
sysDescr Shows the system assigned name and the software
version.
sysUpTime Shows the elapsed time since the system last
started.
sysContact Configures the contact information (in this case, an
email address) for the Avaya support group.
sysName Configures the name of this device.
sysLocation Configures the physical location of this device.
VirtualIpv6Addr Specifies the virtual IPv6 address.
VirtualIpv6PrefixLength Specifies the length of the virtual IPv6 address prefix
(in bits).
DnsDomainName Configures the default domain for querying the DNS
server.
LastChange Displays the time since the last configuration
change.
LastVlanChange Displays the time since the last VLAN change.
LastStatisticsReset Displays the time since the statistics counters were
last reset.
LastRunTimeConfigSave Displays the last run-time configuration saved.
DefaultRuntimeConfigFileName Displays the default Run-time configuration file
directory name.
ConfigFileName Specifies the name of a new configuration file.
ActionGroup1 Can be one of the following actions:
• resetCounters—resets all statistic counters
• saveRuntimeConfig—saves the current run-time
configuration
• loadLicense—Loads a software license file to
enable features
ActionGroup2 Specifies the following action:
resetlstStatCounters—Resets the IST statistic
counters
Table continues…
Chassis operations configuration using EDM
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 83
Comments on this document? [e-mail]