Admin Guide

Telnet0 rwa rwa 192.0.2.24 (current)
Console none ----------
Port egress COS queue statistics
Use the show qos cosq-stats interface <PT_PORT> to retrieve the port egress COS queue
statistics. The syntax for this command is as follows:
show qos cosq-stats interface <PT_PORT>
The following example shows output from the show qos cosq-stats interface <PT_PORT>
command.
Switch:1#show qos cosq-stats interface 1/42
================================================================================
Port:1/42 QOS CoS Queue Stats
================================================================================
CoS Out Packets Out Bytes Drop Packets Drop Bytes
--------------------------------------------------------------------------------
0 0 0 0 0
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
5 0 0 0 0
6 0 0 0 0
7 0 0 0 0
Switch:1#
CPU queue statistics
Use the show qos cosq-stats cpu-port to display the statistics of the forwarded packets
and bytes, and the dropped packets and bytes for the traffic sent toward CP. The queue assignment
is based on the protocol types, not on the internal COS value. These statistics are useful for
debugging purposes.
The syntax for this command is as follows:
show qos cosq-stats cpu-port
The following example shows output from the show qos cosq-stats cpu-port command.
Switch:1#show qos cosq-stats cpu-port
================================================================================
QOS CoS Queue Cpu Port Stats Table
================================================================================
CoS Out Packets Out Bytes Drop Packets Drop Bytes
--------------------------------------------------------------------------------
0 0 0 0 0
1 0 0 0 0
2 0 0 0 0
Port egress COS queue statistics
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 213
Comments on this document? [e-mail]