Admin Guide

Total Required Max
Chassis Chassis Redundant Allocated Available
Type Power Power Power Power
--------------------------------------------------------------------------------
8284XSQ 800 0 145 655
--------------------------------------------------------------------------------
Power information for power supplies
Use the show sys power power-supply command to view detailed power information for each
power supply.
The syntax for this command is as follows.
show sys power power-supply
The following example shows sample command output.
VSP-8284XSQ:1#show sys power power-supply
================================================================================
Power Supply Information
================================================================================
Power Type Input Serial Part Oper Max
Supply Voltage Num Num Status Power
--------------------------------------------------------------------------------
PS#2 AC 110/220 GWXD1349000116- DPS-800RB up 800
--------------------------------------------------------------------------------
System information
Use the show sys command to display system status and technical information about the switch
hardware components and software configuration. The command shows several pages of
information, including general information about the system (such as location), chassis (type, serial
number, and base MAC address), temperature, power supplies, fans, cards, system errors, port
locks, topology status, and message control information. The syntax for this command is as follows.
show sys <dns|force-msg|mgid-usage|msg-control|mtu|power|setting|
software|stats|topology-ip>
The following table explains parameters for this command.
Table 52: Command parameters
Parameter
Description
dns
Shows the DNS default domain name.
force-msg
Shows the message control force message pattern
settings.
Table continues…
Power information for power supplies
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 209
Comments on this document? [e-mail]