Admin Guide

LED#3 Label : Rps
LED#3 Status : Off
LED#4 Label : Fan
LED#4 Status : GreenSteady
System Error Info :
Send Login Success Trap : false
Send Authentication Trap : false
Error Code : 0
Error Severity : 0
Port Lock Info :
Status : off
LockedPorts :
Message Control Info :
Action : suppress-msg
Control-Interval : 30
Max-msg-num : 5
Status : enable
Configuration Operation Info :
Last Change: 0 day(s), 10:37:22
Last Vlan Change: 0 day(s), 06:42:58
Last Statistic Reset: 0 day(s), 00:00:00
Use show interface gigabtethernet command to display the port information of the switch.
The syntax to this command is as follows:
show interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-
port]][,...]}
Following example shows output form show interfaces gigabitethernet 1/41 – 1/42
command:
Switch:1#show interfaces gigabitEthernet 1/41-1/42
================================================================================
Port
Interface
================================================================================
PORT LINK PORT
PHYSICAL STATUS
NUM INDEX DESCRIPTION TRAP LOCK MTU ADDRESS
ADMIN OPERATE
----------------------------------------------------------------------------------
1/41 232 40GbNone true false 1950 b0:ad:aa:41:34:28 down down
1/42 233 40GbNone true false 1950 b0:ad:aa:41:34:29 down down
Hardware information
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 207
Comments on this document? [e-mail]