Admin Guide

Creating accounts for different access levels
Use the following procedure to create accounts for different access levels in enhanced secure
mode. You must be the administrator to configure the different access levels.
Before you begin
• You must enable enhanced secure mode.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Create accounts on the VSP switch for different access levels:
password create–user {auditor|operator|privilege|security} WORD<1–
255>
3. Save the configuration:
save config
Note:
The save config command saves the configuration file with the filename configured
as the primary configuration filename in boot config. Use the command show boot
config choice to view the current primary and backup configuration filenames.
Example
Create an account at the auditor level for jsmith:
Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#password create-user auditor jsmith
Switch:1(config)#save config
Variable definitions
Use the data in the following table to use the password create-user command.
Variable
Value
{auditor|operator|privilege|security} Specifies the access level for the user.
WORD<1–255> Specifies the user name.
Deleting accounts in enhanced secure mode
Use the following procedure to delete accounts in enhanced secure mode.
Before you begin
• You must enable enhanced secure mode.
• You must be an admin or privilege user to delete accounts.
System access configuration using ACLI
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 183
Comments on this document? [e-mail]