Admin Guide

8. From the KeyAction options, choose a key action.
9. In the RsaKeySize box, type the RSA key size.
10. In the DSAKeySize field, type the DSA key size.
11. Select the RsaAuth box for RSA authentication if you want.
12. Select the DsaAuth box for DSA authentication if you want.
13. Select the PassAuth box for password authentication if you want.
14. Click Apply.
SSH field descriptions
Use the data in the following table to use the SSH tab.
Name Description
Enable Enables, disables, or securely enables SSHv2. The options are:
• false
• true
• secure
Select false to disable SSHv2 services. Select true to enable SSHv2 services. Select
secure to enable SSH and disable access services (SNMP, FTP, TFTP, rlogin, and
Telnet). The default is false.
Important:
Do not enable SSHv2 secure mode using Enterprise Device Manager. Enabling
secure mode disables SNMP. This locks you out of the Enterprise Device
Manager session. Enable SSHv2 secure mode using ACLI.
Version Configures the SSH version. The options are:
• v2only
The default is v2only.
Port Configures the SSHv2 connection port number. <22 or 1024–49151> is the port range
of SSHv2.
Important:
You cannot configure the TCP port 6000 as SSHv2 connection port.
MaxSession Configures the maximum number of SSHv2 sessions allowed.
The value can be from 0 to 8. The default is 4.
Timeout Configures the SSHv2 authentication connection timeout in seconds. The default is 60
seconds.
KeyAction Configures the SSHv2 key action. The options are:
• none
• generateDsa
Table continues…
Secure Shell configuration using Enterprise Device Manager
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 161
Comments on this document? [e-mail]